Ford Performance

Ford Performance

  • Enhance the performance of the 2.7L EcoBoost engine in your 2024 F-150. Ford Performance Parts calibrations are engineered and dyno tested to increase power and performance while maintaining reliability.  

Fits 2024 ONLY  
Peak Power = 355 hp @ 5,500 rpm 
Peak Torque = 433 lb-ft @ 3,500 rpm 
Improved throttle response throughout rpm range 
Optimized Shift Schedule 
Premium Fuel Required 
Fits 4x2 and 4x4 models 
For all cab configurations and trim levels 
For US & Canadian vehicles 
3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician 
50-state approved - California C.A.R.B. EO#: D-431-12 
M-12655-F ProCal 4 delivery tool included (Tire size and gear ratio cannot be adjusted).  

***For 2021-2023 F-150 equipped with the 3.5L engine, please see M-9603-F35***  

***For 2021-2023 F-150 Raptor equipped with 3.5L engine, please see M-9603-R35***
 
 ***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***    

  ***NOTE*** ProCal 4 software only available for Windows 7 or greater.  Will NOT work with Windows 10 in "S Mode".      

***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features.  Please connect tool to PC periodically to receive the updates automatically.    

 ****THIS PART IS NOT RETURNABLE!!!**** F-150 2.7L PERFORMANCE ENGINE CALIBRATION

    F-150 2.7L PERFORMANCE ENGINE CALIBRATION

    Enhance the performance of the 2.7L EcoBoost engine in your 2024 F-150. Ford Performance Parts calibrations are engineered and dyno tested to increase power and performance while maintaining...

    $715.85
  • Fits all 2015-2023 F-150   
Not validated for use on 2022+ F-150 Lightning  
Black paint finish, with black textured inserts and "Ford Performance" branded logo to OEM standards   
Set of 4  -20" x 8.5" Wheels 
Includes 4 black chrome Ford oval center caps 
Includes M-1180-B TPMS sensor and activation tool kit

    F-150 20" INSERT WHEEL KIT

    Fits all 2015-2023 F-150    Not validated for use on 2022+ F-150 Lightning   Black paint finish, with black textured inserts and "Ford Performance" branded logo to...

    $1,274.63
  • Enhance the performance of your 2024 F-150 3.5L EcoBoost engine with the Ford Performance Parts calibration. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power and increased performance while maintaining reliability.


Fits 2024 ONLY 
Peak power = 450 HP @ 5,250 rpm 
+55 HP @ 5,250 rpm 
Peak torque = 510 lb-ft @ 3,500 rpm 
+100 lb-ft @ 2,500 rpm
Improved throttle response throughout the rpm range 
Optimized Shift Schedule  
Premium Fuel Required (91 octane minimum) 
M-12655-F Pro-Cal 4 delivery tool included  
3yr/36k mile Ford Performance Parts warranty from new vehicle in-service when installed at a Ford dealer or by an ASE/Red Seal certified technician. Please contact the Ford Performance Parts Tech-line for warranty registration. 
For US & Canada Vehicles Only 
For 4x2 and 4x4 models - all cab configurations and trim levels 
50-state approved. C.A.R.B. EO#: D-431-12 
ProCal Tool can read and clear DTCs 
Tire size and gear ratio cannot be adjusted
 
***DOES NOT FIT 3.5L POWERBOOST HYBRID ENGINES***  
 
 ***For 2021-2023 F-150 Raptor 3.5L engine, please see M-9603-R35 . For 2024 F150 Raptor 3.5L engine, please see M-9603-R35A 
 
 ***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***      
 
 ***NOTE*** ProCal 4 software only available for Windows 7 or greater.  Will NOT work with Windows 10 in "S Mode".     
 
 ****THIS PART IS NOT RETURNABLE!!!**** F-150 3.5L PERFORMANCE ENGINE CALIBRATION

    F-150 3.5L PERFORMANCE ENGINE CALIBRATION

    Enhance the performance of your 2024 F-150 3.5L EcoBoost engine with the Ford Performance Parts calibration. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power...

    $715.85
  • Proudly Made in the USAThe F-150 Align-Lock kit provides an additional restraining mechanism to the factory alignment adjustment to improve the robustness of the alignment setting during vehicle usage in rough/harsh conditions.

Fits 2021-2025 F-150
 
Kit Includes:
F-150 align lock assembly
Lower control arm nuts and bolts

    F-150 ALIGN LOCK

    The F-150 Align-Lock kit provides an additional restraining mechanism to the factory alignment adjustment to improve the robustness of the alignment setting during vehicle usage in rough/harsh...

    $150.00
  • Fits 2024-2025 F-150 with camera provision 

Kit includes: 
Front smoked chrome oval with camera provision 
Requires vehicle with "360 Camera Package" option

    F-150 BLACK OVAL KIT - WITH CAMERA

    Fits 2024-2025 F-150 with camera provision    Kit includes:  Front smoked chrome oval with camera provision  Requires vehicle with "360 Camera Package" option

    $123.75
  • Fits 2024-2026 F-150 without camera provision 

Kit includes: 
Front smoked chrome oval -without camera provision 
Rear smoked chrome ov

    F-150 BLACK OVAL KIT W/O CAMERA

    Fits 2024-2026 F-150 without camera provision    Kit includes:  Front smoked chrome oval -without camera provision  Rear smoked chrome ov

    $123.75
  • Proudly Made in the USA  Provides a leveled sport truck stance by reducing ride height approximately 1.5".
 
Fits 2021-2026 F-150 2WD and 4WD Super Cab and SuperCrew equipped with PowerBoost
Kit includes laser-cut, steel lowering shackles with urethane bushings
Improvements:
Grease fitting added to lower shackle tube
Bushing grease groove
DOM center tube tolerance
NOTE - NOT COMPATIBLE WITH:
F-150 Lightning
F-150 Tremor    
F-150 Raptor

    F-150 POWERBOOST REAR LOWERING KIT

      Provides a leveled sport truck stance by reducing ride height approximately 1.5".   Fits 2021-2026 F-150 2WD and 4WD Super Cab and SuperCrew equipped with PowerBoost Kit...

    $260.00
  • Enhance the performance of the 3.5L EcoBoost engine in your 2024 F-150 Raptor. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power and increased performance while maintaining reliability.
Fits 2024 ONLY
Peak power = 466 HP @ 5,500 rpm
+26 HP @ 3,250 rpm
Peak torque = 554 lb-ft @ 3,250 rpm
+54 lb-ft @ 2,500 rpm
Improved throttle response throughout the rpm range
Optimized Shift Schedule 
Premium Fuel Required (91 octane minimum)
M-12655-F ProCal 4 delivery tool included 
3yr/36k mile Ford Performance Parts warranty from new vehicle in-service date when installed at a Ford dealer or by an ASE/Red Seal certified technician. Please contact the Ford Performance Parts Tech-line for warranty registration.
For US & Canada Vehicles Only
50-state approved. C.A.R.B. EO#: D-431-12
ProCal Tool can read and clear DTCs
Tire size and gear ratio cannot be adjusted
***For non-Raptor 2021-2023 F-150 3.5L EcoBoost engine see M-9603-F35. For 2021-2023 F150 Raptor 3.5L engine see M-9603-R35

***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***     

***NOTE*** ProCal 4 software only available for Windows 7 or greater.  Will NOT work with Windows 10 in "S Mode".    

****THIS PART IS NOT RETURNABLE!!!**** F-150 RAPTOR 3.5L PERFORMANCE ENGINE CALIBRATION

    F-150 RAPTOR 3.5L PERFORMANCE ENGINE CALIBRATION

    Enhance the performance of the 3.5L EcoBoost engine in your 2024 F-150 Raptor. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power and increased performance while...

    $715.89
  • Proudly Made in the USA  
Fits 2021-2026 F-150 2.7L & 3.5L EcoBoost® and 5.0L with 145" & 157" wheelbase. 157" wheelbase trucks require mid-pipe extension M-5248-FEXT
Ford Performance Sport exhaust systems are uniquely designed and tuned to provide an aggressive and throaty high-performance sound that is sure to enhance your driving experience
50-State legal - Meets 95 decibel drive-by noise standard for aftermarket exhaust systems when installed on stock applications 
Manufactured in the USA from high quality 304 stainless steel  
Features ultra-smooth mandrel bends, warp-free flanges and superior craftsmanship  
Dual rear exit with chrome plated 4-inch stainless steel exhaust tips
NOTE: Does not fit any 3.5L PowerBoost® trucks

NOTE: Does not fit any 122" or 141" wheelbase trucks

    F-150 SPORT EXHAUST - CHROME - REAR EXIT

       Fits 2021-2026 F-150 2.7L & 3.5L EcoBoost® and 5.0L with 145" & 157" wheelbase. 157" wheelbase trucks require mid-pipe extension M-5248-FEXT Ford...

    $1,781.00
  • Ford Performance Parts worked with one of the most recognized names in Off-Road lighting-RIGID® to offer Off-Road Light Kits which work with Ford vehicles. These F-Series specific A-pillar lights use mounts behind the hood for a secure and clean appearance. These are a great solution to help illuminate trails as well as difficult, uneven and rocky terrain.

Fits 2020-2026 F-150
Fits 2019-2026 Super Duty

This kit features:
One pair of RIGID® D-SS Spot Pod Off-Road Lights
Raw Lumens - 6336
Watts - 45
Beam Pattern - Spot optic with side spill lighting offering 120-degree wide beam
LED Life Span - 50,000 HR
Two mounting brackets
Wiring harness
FPP black covers
All required mounting fasteners and hardware

NOTE: This kit only works with 2020-2026 F-150 and 2019-2026 Super Duty trucks.

WARNING: This part has been designed and is intended for off-highway application only. Installation on a vehicle intended for use on public roads may violate U.S., Canadian, state or provincial laws and regulations including relating to emission requirements and motor vehicle safety standards. In addition, installation of this part may adversely affect the warranty coverage on your vehicle.

    F-SERIES A-PILLAR OFF-ROAD LIGHT KIT

    Ford Performance Parts worked with one of the most recognized names in Off-Road lighting-RIGID® to offer Off-Road Light Kits which work with Ford vehicles. These F-Series specific A-pillar lights...

    $472.50
  • FORD PERFORMANCE 9.75" F150 DIFFERENTIAL COVER

    FORD PERFORMANCE 9.75" F150 DIFFERENTIAL COVER

    Ford Performance branded differential cover Fits all F-150 and Raptor with 9.75" differential Rugged powdercoat finish More durable that factory differential cover  Fits SVT...

    $250.00
  • Proudly Made in the USAThe Ford Truck Bed Camera is a smart security camera for your truck bed. When paired with a Ford Security Package plan, the Ford Truck Bed Camera provides real-time truck bed monitoring via the Ford app when the vehicle is parked, and the owner is away, including showing you the precise location of the Ford Truck Bed Camera. 

This hardware uses an ultra-wide 180-degree field of view and night vision to power HD remote live-streaming, AI-powered intrusion monitoring and threat detection, and automatic cloud storage. And with seamless over-the air software updates, you will have access to the latest features available for your camera. 

The Ford Truck Bed Camera is designed with ease-of-use in mind, which includes installation. You can install it yourself in as little as 45 minutes with our instructions, and we provide a support team ready to assist if needed. If you prefer, the device can also be shipped to your preferred Ford dealer to be installed by them. It’s important to note that if dealer installation is chosen, the customer will need to set up the Truck Bed Camera in the Ford app and charge the battery to complete the installation process.   

Product Details:
Requires active Ford Security Package plan & Ford App 
1080p HD Truck Bed Camera 
Ultra-wide 180° field of view 
HD Live Streaming 
Night Vision 
Intrusion Notification 
Cloud Saved Video Evidence 
Continuous Power 
DIY Setup 
LED light bar 
Continuous OBD-II charging 
Removable LiFePO4 (lithium-ion) battery 
Bluetooth 5.3 
Truck Bed Camera Hub 

Fits These Vehicles 
2024 - 2026 F-150 
2024 - 2026 Super Duty

*Important information about this product:  This camera and related services require video feed and precise location data. By purchasing this camera, you consent to our collection of this data for providing and maintaining this camera and related services.

    FORD TRUCK BED CAMERA

    The Ford Truck Bed Camera is a smart security camera for your truck bed. When paired with a Ford Security Package plan, the Ford Truck Bed Camera provides real-time truck bed monitoring via the...

    $499.00
  • Replace your lost or damaged Ford Performance Bronco roof mounted light lens covers with the same covers as supplied in the kit.
Fits M-15200K-BRL 40" roof mounted lights 
Fits M-15200K-BRRL 40" roof mounted with OE roof rack lights
Includes four (4) 10" replacement cover sections

    FP BRONCO LIGHT BAR COVER SET OF 4

    Replace your lost or damaged Ford Performance Bronco roof mounted light lens covers with the same covers as supplied in the kit. Fits M-15200K-BRL 40" roof mounted...

    $67.50
  • This kit fits Mustang 5.0L Coyote Gen 4 engine and features:
Production Gen 4 Coyote Mustang GT Alternator 
Belt tensioner
Idler pulley
Belt
Mounting hardware
190 amp output 
Fits M-6007-M50D and M-6007-M50DAUTO Ford Performance crate engines
Included in the M-9000-PMCM4 and M-9000-PMCA4 power modules
Designed for the higher RPM capability of the Gen 4 Mustang Coyote engine

***Not compatible with Gen 1, 2, or 3 Coyote wiring harness***

    GEN 4 COYOTE ALTERNATOR KIT

    This kit fits Mustang 5.0L Coyote Gen 4 engine and features: Production Gen 4 Coyote Mustang GT Alternator  Belt tensioner Idler pulley Belt Mounting hardware 190 amp...

    $382.50
  • Fits 2024-2025 Mustang
Originally from Dark Horse (Non-Performance Pack)
Black painted finish 
Includes
Qty.2 19" x 9.5" offset 40mm front wheels 
Qty.2 19" x 10" offset 52.5mm rear wheels 
Qty.4 Mustang Center Caps    
TPMS Sensor Kit M-1180-433MHZ2  
Also available: 
Sinister Bronze: M-1007K-DHSB 
Battleship Grey: M-1007K-DHBG

    MUSTANG 19"X9.5" & 19"X10" WHEEL KIT BLACK

    Fits 2024-2025 Mustang Originally from Dark Horse (Non-Performance Pack) Black painted finish  Includes Qty.2 19" x 9.5" offset 40mm front wheels  Qty.2 19" x...

    $1,278.54
  • Proudly Made in the USAFits 2024-2026 Mustang 2.3L EcoBoost Coupe and Convertible with factory Active exhaust

Upgrade the appearance and sound of your factory equipped active exhaust Mustang with this exhaust featuring quad 4" black chrome plated stainless steel tips
Uniquely designed and tuned to provide optimum performance, aggressive sound, durability and pure driving excitement
Manufactured in the USA from high-quality 304 stainless steel
Features 2.25" tubing with ultra-smooth mandrel bends, warp-free flanges and superior craftsmanship
Retains factory GT quad tip valance, diffuser, hangers and mounts
Factory exhaust pipe must be cut to install clamp on Ford Performance axle-back mufflers

Complete cat-back system M-5200-M2EB also available for Extreme active upgrade

    MUSTANG 2.3L EXTREME ACTIVE AXLE-BACK - BLACK TIP

    Fits 2024-2026 Mustang 2.3L EcoBoost Coupe and Convertible with factory Active exhaust   Upgrade the appearance and sound of your factory equipped active exhaust Mustang with this exhaust...

    $633.62
  • Customize the appearance of your 2024-2025 Mustang with the Ford Performance Carbon Fiber Hood Vent with Gloss Finish
  
Fits all 2024-2025 GT & Dark Horse Mustangs
Direct replacement of OE component
Autoclave process with pre-preg 3K, 2x2 twill carbon fiber cloth with gloss finish
Kit includes hood vent and all necessary fasteners for installation

Matching Gloss Finish Mirror Skull Cap with Turn Signals, Mirror Skull Caps without Turn Signals, Spoiler with Gurney Flap, GT Splitter and Dark Horse Splitter also available

Matte finish hood vent M-16612-MM also available

NOTE: Only fits GT & Dark Horse Mustangs

    MUSTANG CARBON FIBER HOOD VENT-GLOSS

    Customize the appearance of your 2024-2025 Mustang with the Ford Performance Carbon Fiber Hood Vent with Gloss Finish    Fits all 2024-2025 GT & Dark Horse Mustangs Direct...

    $959.90
  • Customize the appearance of your 2024-2025 Mustang with the Ford Performance Carbon Fiber Hood Vent with Matte Finish

Fits all 2024-2025 GT & Dark Horse Mustangs
Direct replacement of OE component
Vacuum infused process with 3K, 2x2 twill carbon fiber cloth with matte finish
Kit includes hood vent and all necessary fasteners for installation

Matching Matte Finish Mirror Skull Cap with Turn Signals, Mirror Skull Caps without Turn Signals, Spoiler with Gurney Flap, GT Splitter and Dark Horse Splitter also available

Gloss finish hood vent M-16612-MG also available

NOTE: Only fits GT & Dark Horse Mustangs

    MUSTANG CARBON FIBER HOOD VENT-MATTE

    Customize the appearance of your 2024-2025 Mustang with the Ford Performance Carbon Fiber Hood Vent with Matte Finish Fits all 2024-2025 GT & Dark Horse Mustangs Direct replacement of OE...

    $959.90