Ford Performance

Ford Performance

  • Designed to run the 2024 Mustang GT Coyote (Gen 4) dual throttle body engine M-6007-M50D with any manual transmission.
Includes: 
PCM with Ford Performance calibration
Electronic throttle control accelerator pedal, eliminating throttle cable routing challenges
Unique control pack harness that replaces the stock body harness designed for custom vehicle builds
OBD-II diagnostic port to assist in engine issue diagnosis
Power distribution module
Mustang GT air boxes
Mustang GT Air inlet tubes
MAF sensors
Upper and lower radiator hoses
HEGO sensors

*PCM with Ford Performance calibration requires a return type fuel system. See installation instructions for fuel system requirements.

Note: Installation of control pack PCM in a production vehicle will result in a no-start condition

Note: NOT FOR USE WITH ANY F150 ENGINE
 
For Gen 1 Coyote engine control pack see M-6017-A504VB 

For Gen 2 Coyote engine control packs see M-6017-504V and M-6017-M50A 

For Gen 3 Coyote engine control packs see M-6017-M50B, M-6017-M50BA, and M-6017-M50BAA 

For Gen 4X Coyote engine control packs see M-6017-M50HA and M-6017-M50HM

    2024 COYOTE 5.0L CONTROL PACK MANUAL TRANS

    Designed to run the 2024 Mustang GT Coyote (Gen 4) dual throttle body engine M-6007-M50D with any manual transmission.Includes:  PCM with Ford Performance calibration Electronic...

    $2,734.65
  • Designed to run the 2024 Mustang GT Coyote 5.0L dual throttle body engine M-6007-M50DAUTO with the 10R80 10-speed transmission from the 2021-2024 Mustang GT. Includes:
PCM with Ford Performance calibration
Electronic throttle control accelerator pedal, eliminating throttle cable routing challenges
Unique control pack harness that replaces the stock body harness designed for custom vehicle builds
OBD-II diagnostic port to assist in engine issue diagnosis
Power distribution module
Mustang GT air boxes
Mustang GT air inlet tubes
MAF sensors
Upper and lower radiator hoses
HEGO sensors

*PCM with Ford Performance calibration requires a return type fuel system. See installation instructions for fuel system requirements.

Note: Installation of control pack PCM in a production vehicle will result in a no-start condition

Note: NOT FOR USE WITH ANY F150 ENGINE

For Gen 1 Coyote engine control pack see M-6017-A504VB

For Gen 2 Coyote engine control packs see M-6017-504V and M-6017-M50A

For Gen 3 Coyote engine control packs see M-6017-M50B, M-6017-M50BA, and M-6017-M50BAA

For Gen 4X Coyote engine control packs see M-6017-M50HM and M-6017-M50HA

    2024 GEN 4 COYOTE CONTROL PACK - AUTOMATIC TRANS

    Designed to run the 2024 Mustang GT Coyote 5.0L dual throttle body engine M-6007-M50DAUTO with the 10R80 10-speed transmission from the 2021-2024 Mustang GT. Includes: PCM with Ford...

    $2,734.65
  • Ford Performance Parts partnered with one of the most recognized names in the Off-Road wheel industry, Method Race Wheels®, to develop and certify this Off-Road Wheel Kit exclusively for the F-150 Raptor
Designed for 2017-2020 F-150 Raptor, 2021-2023 F-150 Raptor and 2024-2025 F-150 Raptor applications
Kit Includes:
Set of 4 Method Race Wheels® 703 Bead Grip®
Matte Black Finish
Bead Grip® technology engages tire bead for increased grip at low tire pressures
Hub-centric fitment specific to F-150 Raptor
Includes 2024-2025 F-150 M-1180-433MHZ TPMS Sensors and Activation Tool (TPMS will not work for 2017-2020 F-150 Raptor and 2021-2023 F-150 Raptor applications)
4 Snap-in center caps with METHOD Bead Grip® logo
For matching black lug vehicle kit see: M-1012K-F15B
This wheel and lug nut combination requires a Thin Wall Socket for installation/removal
Diameter: 17" 
Width: 8.5"    
Offset: +32mm
Center Hub Bore: 86.87mm
Bolt Pattern (PCD): 6 x 135mm
*Tires not included*

    2024-2025 F-150 RAPTOR METHOD WHEEL KIT - BLACK

    Ford Performance Parts partnered with one of the most recognized names in the Off-Road wheel industry, Method Race Wheels®, to develop and certify this Off-Road Wheel Kit exclusively for the...

    $1,537.17
  • Production crank sprocket for the Super Duty 7.3L gas truck engine.
Fits 2020-2025 Super Duty 7.3L engine
Fits M-6007-73
Fits M-6007-73B

    7.3L GAS ENGINE CRANK GEAR

    Production crank sprocket for the Super Duty 7.3L gas truck engine. Fits 2020-2025 Super Duty 7.3L engine Fits M-6007-73 Fits M-6007-73B

    $13.50
  • Meet the HOSS 3.0 Bronco Package engineered around a Prerunner mindset, as seen in Wildtrak models. At its core are five-zone, rate-sensitive FOX 2.5" internal-bypass shocks with remote reservoirs, which produce progressive damping zones that can go from compliant support to delivering maximum damping to prevent bottom-out on big drops and events. Delivering solid control and plush compliance over the roughest terrain that never needs manual fine tuning.
A direct bolt-in replacement suspension package, improving both ride quality and stance of your Bronco that has been validated through Ford’s rigorous vehicle durability testing, including running and podium at the NORRA 1000. 

Backed by the Ford Performance 3yr/36,000 mile warranty from new vehicle in-service date when installed by a Ford Dealer or ASE/Red Seal certified technician

Approximately 2" of lift (on Non-Sasquatch packages) results in optimal ground clearance and approach/departure angles

Improves front approach angle: 44.3 deg. vs. 35.5 deg. stock
Improves rear departure angle: 37 deg. vs. 29.7 deg. stock
Fits: 2021-2025 Bronco 2-Door 

For 4-Door specific kit, see M-18000-B2
Pre-MY22 to check for sway bar endlink attachment brackets located on rear frame rail, not included with all models.    
Kit Includes:

HOSS 3.0 - 2.5" FOX shocks with 5-zone damping including internal bypass and remote reservoirs
HOSS 3.0 - Rear stabilizer bar
Sway bar endlinks
Mounting hardware and fasteners

    BRONCO 2-DOOR WILDTRAK SUSPENSION KIT

    Meet the HOSS 3.0 Bronco Package engineered around a Prerunner mindset, as seen in Wildtrak models. At its core are five-zone, rate-sensitive FOX 2.5" internal-bypass shocks with remote reservoirs,...

    $2,224.80
  • Meet the HOSS 3.0 Bronco Package engineered around a Prerunner mindset, as seen in Wildtrak models. At its core are five-zone, rate-sensitive FOX 2.5" internal-bypass shocks with remote reservoirs, which produce progressive damping zones that can go from compliant support to delivering maximum damping to prevent bottom-out on big drops and events. Delivering solid control and plush compliance over the roughest terrain that never needs manual fine tuning.
A direct bolt-in replacement suspension package, improving both ride quality and stance of your Bronco that has been validated through Ford’s rigorous vehicle durability testing, including running and podium at the NORRA 1000. 

Backed by the Ford Performance 3yr/36,000 mile warranty from new vehicle in-service when installed by a Ford Dealer or ASE/Red Seal certified technician

Approximately 2" of lift (on Non-Sasquatch packages) results in optimal ground clearance and approach/departure angles

Improves front approach angle: 44.3 deg. vs. 35.5 deg. stock
Improves rear departure angle: 37 deg. vs. 29.7 deg. stock
Fits: 2021-2025 Bronco 4-Door (Except Raptor)

For 2-Door specific kit, see M-18000-B2A
Pre-MY22 to check for sway bar endlink attachment brackets located on rear frame rail, not included with all models.  
Kit Includes:

HOSS 3.0 - 2.5" FOX shocks with 5-zone damping including internal bypass and remote reservoirs
HOSS 3.0 - Rear stabilizer bar
Sway bar endlinks
Mounting hardware and fasteners

    BRONCO 4-DOOR WILDTRAK SUSPENSION KIT

    Meet the HOSS 3.0 Bronco Package engineered around a Prerunner mindset, as seen in Wildtrak models. At its core are five-zone, rate-sensitive FOX 2.5" internal-bypass shocks with remote reservoirs,...

    $2,163.00
  • Upgrade your Bronco with the Ford Performance Bronco Raptor fog light upgrade kit. This kit includes everything needed to upgrade your Bronco, including the RIGID® fog lights and custom wiring harness allowing use of Raptor lamps on non-Raptor Broncos.
  
Fits all 2021-2025 Broncos with modular bumper
Kit includes:
RIGID® fog lamps
Factory fog lamp brackets
Factory fog lamp bezels
Bronco Raptor bumper end cap assemblies
Bronco Raptor bumper rear covers
Factory wiring jumper harness
Custom wiring harness
All fasteners required for complete installation

NOTE: This kit is only for use with the Ford Performance Modular front bumper, available as standard on Raptor, optional on non-Raptor or available on our site as M-17757-BM for the non-Park Aid version or the soon to be released M-17757-BMP with Park Aid.

NOTE: This kit is designed to be used with the factory Auxiliary switches. A universal switch is not included. If you do not have the factory aux switches, you can upgrade your Bronco with the soon to be released Ford Performance Bronco Auxiliary Switch Kit M-9100-BR or determine the best switch solution for your application.

    BRONCO AUXILIARY LIGHTING KIT- MODULAR FRONT BUMPER

    Upgrade your Bronco with the Ford Performance Bronco Raptor fog light upgrade kit. This kit includes everything needed to upgrade your Bronco, including the RIGID® fog lights and custom wiring...

    $1,075.50
  • Upgrade your 2021-2026 Bronco with the Ford Performance Heavy Duty Modular Front Bumper kit with Park Aid. This is the same OEM bumper, skid plate and tow hooks offered as a factory option.
Production level tested & validated to OEM crash standards
Kit includes
Bumper shell
End caps
Bumperettes
Sensor bezels
Sensor wiring harness
Reinforcements and mounting plates
Tow hooks
Skid plate
Intercooler brackets
Seal
All required fasteners to complete installation
Reuse of front parking sensors from stock bumper required
Factory LED fog lights from standard base bumper are not compatible or useable in this bumper

NOTE: Not compatible with Bronco Raptor due to unique bumper end caps and RCM calibration 

Please confirm your fitment before purchase:

Requires Airbag Safety System software update to ensure proper airbag deployment. Requires Ford Vehicle Software for Installation *

Special Tools for Installation
* Installation Requires a Ford Dealer or Qualified Technician to ensure proper airbag deployment.
* Requires additional Ford Vehicle Software (RCM Airbag Calibration).  Independent Installers see  Ford Diagnostic & Repair System (FDRS) www.motorcraftservice.com

    BRONCO MODULAR FRONT BUMPER W/ PARK AID

    Upgrade your 2021-2026 Bronco with the Ford Performance Heavy Duty Modular Front Bumper kit with Park Aid. This is the same OEM bumper, skid plate and tow hooks offered as a factory option...

    $965.00
  • Upgrade your 2021-2026 Bronco with the Ford Performance Bronco Raptor LED headlamp and module kit
Fitment includes all 2021-2026 Broncos
Kit includes left and right LED headlamps and modules for a complete upgrade solution
Ford production OEM parts from the Bronco Raptor

    BRONCO RAPTOR HEADLAMP UPGRADE KIT

    Upgrade your 2021-2026 Bronco with the Ford Performance Bronco Raptor LED headlamp and module kit Fitment includes all 2021-2026 Broncos Kit includes left and right LED headlamps and modules...

    $1,271.30
  • Proudly Made in the USAProtect your Bronco with the Ford Performance Parts Bronco Raptor skid plate kit.

Fits 2021-2026 Bronco 2-door & 4-door models with steel or modular front bumper
Kit includes the OE Bronco Raptor front, under engine, transmission and transfer case skid plates
Kit also includes FPP powder coated front skid plate adaptor and transmission shield cross brace bracket
All necessary fasteners and hardware are included to complete the installation

NOTE: Only fits Broncos with steel or modular front bumper

    BRONCO RAPTOR SKID PLATE KIT

    Protect your Bronco with the Ford Performance Parts Bronco Raptor skid plate kit. Fits 2021-2026 Bronco 2-door & 4-door models with steel or modular front bumper Kit includes the OE...

    $817.60
  • Stand out from the crowd with the Red front grille lettering overlay kit for Bronco
Fits all 2021-2026 Broncos
Aligns perfectly to apply over existing production grille letters
Red finish
Kit Includes:
Individual B-R-O-N-C-O grille letter emblem overlays
Easy installation with pre-applied 3M™ adhesive backing
Durable finish, resistant to peeling, weathering, and is car wash safe
No drilling required

    BRONCO RED GRILLE LETTERS

    Stand out from the crowd with the Red front grille lettering overlay kit for Bronco Fits all 2021-2026 Broncos Aligns perfectly to apply over existing production grille letters Red finish Kit...

    $83.33
  • Upgrade your Bronco Sport with Badlands Suspension System for increased ride height, improved vehicle stance, and off road capability  

Fits: 2021-2025 Bronco Sport
Compatible with all Non-Badlands variant 
20 mm Front / 30mm Rear Lift over base series
Direct bolt-in replacement suspension package
Improved Off Road Capability (+1” Suspension Travel)


Includes following:


Assembled Front Struts with Spring
Rear Dampers
Rear Springs with Isolators
Front and Rear Sway bar with bushings
Sway Endlinks
Rear Knuckles (+15mm lift)
Installation fasteners 

Includes FPP 3yr/36,000 mile warranty when installed by a Ford Dealer or ASE/Red Seal certified technician

    BRONCO SPORT LIFT KIT - BADLANDS

    Upgrade your Bronco Sport with Badlands Suspension System for increased ride height, improved vehicle stance, and off road capability     Fits: 2021-2025 Bronco Sport Compatible with...

    $737.48
  • Enhance the performance of the 2.7L EcoBoost engine in your 2024 F-150. Ford Performance Parts calibrations are engineered and dyno tested to increase power and performance while maintaining reliability.  

Fits 2024 ONLY  
Peak Power = 355 hp @ 5,500 rpm 
Peak Torque = 433 lb-ft @ 3,500 rpm 
Improved throttle response throughout rpm range 
Optimized Shift Schedule 
Premium Fuel Required 
Fits 4x2 and 4x4 models 
For all cab configurations and trim levels 
For US & Canadian vehicles 
3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician 
50-state approved - California C.A.R.B. EO#: D-431-12 
M-12655-F ProCal 4 delivery tool included (Tire size and gear ratio cannot be adjusted).  

***For 2021-2023 F-150 equipped with the 3.5L engine, please see M-9603-F35***  

***For 2021-2023 F-150 Raptor equipped with 3.5L engine, please see M-9603-R35***
 
 ***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***    

  ***NOTE*** ProCal 4 software only available for Windows 7 or greater.  Will NOT work with Windows 10 in "S Mode".      

***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features.  Please connect tool to PC periodically to receive the updates automatically.    

 ****THIS PART IS NOT RETURNABLE!!!**** F-150 2.7L PERFORMANCE ENGINE CALIBRATION

    F-150 2.7L PERFORMANCE ENGINE CALIBRATION

    Enhance the performance of the 2.7L EcoBoost engine in your 2024 F-150. Ford Performance Parts calibrations are engineered and dyno tested to increase power and performance while maintaining...

    $715.85
  • Fits all 2015-2023 F-150   
Not validated for use on 2022+ F-150 Lightning  
Black paint finish, with black textured inserts and "Ford Performance" branded logo to OEM standards   
Set of 4  -20" x 8.5" Wheels 
Includes 4 black chrome Ford oval center caps 
Includes M-1180-B TPMS sensor and activation tool kit

    F-150 20" INSERT WHEEL KIT

    Fits all 2015-2023 F-150    Not validated for use on 2022+ F-150 Lightning   Black paint finish, with black textured inserts and "Ford Performance" branded logo to...

    $1,274.63
  • Enhance the performance of your 2024 F-150 3.5L EcoBoost engine with the Ford Performance Parts calibration. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power and increased performance while maintaining reliability.


Fits 2024 ONLY 
Peak power = 450 HP @ 5,250 rpm 
+55 HP @ 5,250 rpm 
Peak torque = 510 lb-ft @ 3,500 rpm 
+100 lb-ft @ 2,500 rpm
Improved throttle response throughout the rpm range 
Optimized Shift Schedule  
Premium Fuel Required (91 octane minimum) 
M-12655-F Pro-Cal 4 delivery tool included  
3yr/36k mile Ford Performance Parts warranty from new vehicle in-service when installed at a Ford dealer or by an ASE/Red Seal certified technician. Please contact the Ford Performance Parts Tech-line for warranty registration. 
For US & Canada Vehicles Only 
For 4x2 and 4x4 models - all cab configurations and trim levels 
50-state approved. C.A.R.B. EO#: D-431-12 
ProCal Tool can read and clear DTCs 
Tire size and gear ratio cannot be adjusted
 
***DOES NOT FIT 3.5L POWERBOOST HYBRID ENGINES***  
 
 ***For 2021-2023 F-150 Raptor 3.5L engine, please see M-9603-R35 . For 2024 F150 Raptor 3.5L engine, please see M-9603-R35A 
 
 ***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***      
 
 ***NOTE*** ProCal 4 software only available for Windows 7 or greater.  Will NOT work with Windows 10 in "S Mode".     
 
 ****THIS PART IS NOT RETURNABLE!!!**** F-150 3.5L PERFORMANCE ENGINE CALIBRATION

    F-150 3.5L PERFORMANCE ENGINE CALIBRATION

    Enhance the performance of your 2024 F-150 3.5L EcoBoost engine with the Ford Performance Parts calibration. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power...

    $715.85
  • Proudly Made in the USAThe F-150 Align-Lock kit provides an additional restraining mechanism to the factory alignment adjustment to improve the robustness of the alignment setting during vehicle usage in rough/harsh conditions.

Fits 2021-2025 F-150
 
Kit Includes:
F-150 align lock assembly
Lower control arm nuts and bolts

    F-150 ALIGN LOCK

    The F-150 Align-Lock kit provides an additional restraining mechanism to the factory alignment adjustment to improve the robustness of the alignment setting during vehicle usage in rough/harsh...

    $150.00
  • Fits 2024-2025 F-150 with camera provision 

Kit includes: 
Front smoked chrome oval with camera provision 
Requires vehicle with "360 Camera Package" option

    F-150 BLACK OVAL KIT - WITH CAMERA

    Fits 2024-2025 F-150 with camera provision    Kit includes:  Front smoked chrome oval with camera provision  Requires vehicle with "360 Camera Package" option

    $123.75
  • Fits 2024-2026 F-150 without camera provision 

Kit includes: 
Front smoked chrome oval -without camera provision 
Rear smoked chrome ov

    F-150 BLACK OVAL KIT W/O CAMERA

    Fits 2024-2026 F-150 without camera provision    Kit includes:  Front smoked chrome oval -without camera provision  Rear smoked chrome ov

    $123.75
  • Proudly Made in the USA  Provides a leveled sport truck stance by reducing ride height approximately 1.5".
 
Fits 2021-2026 F-150 2WD and 4WD Super Cab and SuperCrew equipped with PowerBoost
Kit includes laser-cut, steel lowering shackles with urethane bushings
Improvements:
Grease fitting added to lower shackle tube
Bushing grease groove
DOM center tube tolerance
NOTE - NOT COMPATIBLE WITH:
F-150 Lightning
F-150 Tremor    
F-150 Raptor

    F-150 POWERBOOST REAR LOWERING KIT

      Provides a leveled sport truck stance by reducing ride height approximately 1.5".   Fits 2021-2026 F-150 2WD and 4WD Super Cab and SuperCrew equipped with PowerBoost Kit...

    $260.00
  • Enhance the performance of the 3.5L EcoBoost engine in your 2024 F-150 Raptor. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power and increased performance while maintaining reliability.
Fits 2024 ONLY
Peak power = 466 HP @ 5,500 rpm
+26 HP @ 3,250 rpm
Peak torque = 554 lb-ft @ 3,250 rpm
+54 lb-ft @ 2,500 rpm
Improved throttle response throughout the rpm range
Optimized Shift Schedule 
Premium Fuel Required (91 octane minimum)
M-12655-F ProCal 4 delivery tool included 
3yr/36k mile Ford Performance Parts warranty from new vehicle in-service date when installed at a Ford dealer or by an ASE/Red Seal certified technician. Please contact the Ford Performance Parts Tech-line for warranty registration.
For US & Canada Vehicles Only
50-state approved. C.A.R.B. EO#: D-431-12
ProCal Tool can read and clear DTCs
Tire size and gear ratio cannot be adjusted
***For non-Raptor 2021-2023 F-150 3.5L EcoBoost engine see M-9603-F35. For 2021-2023 F150 Raptor 3.5L engine see M-9603-R35

***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***     

***NOTE*** ProCal 4 software only available for Windows 7 or greater.  Will NOT work with Windows 10 in "S Mode".    

****THIS PART IS NOT RETURNABLE!!!**** F-150 RAPTOR 3.5L PERFORMANCE ENGINE CALIBRATION

    F-150 RAPTOR 3.5L PERFORMANCE ENGINE CALIBRATION

    Enhance the performance of the 3.5L EcoBoost engine in your 2024 F-150 Raptor. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power and increased performance while...

    $715.89