Expect nothing less than perfection from JDM Engineering for your Gen 2 Ford Raptor Custom Tune! First and foremost, we partnered with SCT to have parameters unlocked in the TCM (transmission control module) and PCM (power trian control module) not available in any other Ecoboost Raptor tune software on the market. This allows us to offer a drastically improved calibration allowing for OEM level refinement of your tune. After years in depth R&D Jim D'Amore has nailed the shift patterns of the Ford 10R80 Transmission, and paired with huge performance gains from the Ecoboost 3.5L V6. What to expect: Drastically reduced turbo lag, crisp wide open throttle shifts, yet silky smooth manners driving around town so you won't spill your over priced drive thru coffee. We command all 10 gears shift strictly in order on throttle, no more skipped shifts, gear hunting, clunks, or slip bangs. As Far as power production, we expect around 425 horsepower and over 520 Pound feet of torque at the tire on a 93 octane tune. That is an average increase of 75-80 HP with over 100 HP gained through out the power curve! As well as 100+ TQ at the tires and over 150 TQ in the power curve! Expect a solid 1-3 mile per gallon gain in fuel economy so you can expect more money in your wallet, and less shelled out at the pump. Job number 1 at JDM Engineering is quality and perfection of your vehicle regardless modifications, so rest assured power production is safe and reliable in even the toughest of conditions. The SCT X4 tuner we offer is simple to use loading our tune onto the vehicle and allows for in-depth useful data acquisition at your fingertips. After 20+ years in the Ford custom tuning business, expect nothing less than perfection for your Raptor from JDM Engineering. Check out the above videos showing out tune in action on the street and offroad!
Below are dyno graphs of our tune!
Here is an excerpt of a review of our tune from a Ford Raptor Forum member:
"I have run the truck stock of course, but also on a 93 race tune from 5 star. My initial impression is that this is MUCH smoother. The stock trans tuning can be a bit harsh, especially since I have an early model 2017. The 5 star tune also was pretty harsh, harsher than stock. The JDM tune is very smooth through the gears, to the point where off throttle gear changes are nearly transparent. Also, the gear selection is terrific, the gear choice throughout the RPM range and varying loads is spot on. I live in a very hilly area with 45-55mph speed limits and it can be very annoying (especially in stock tune) for the truck to lug down too much before it has to downshift multiple gears to make it up a hill, it makes it feel like the truck is struggling. Proper shifting lets it kick down a gear quicker and go up hills with ease like it should.
The tune also feels like it makes great power. This part can be a bit tricky as peaky power and harsh shifting can feel faster, where real smooth linear power can be deceiving. I haven't done any logging, but by my analog boost gauge it looks like I'm peaking out around 22 psi on flat ground in normal mode. Low end is mellow and less nervous than the 5 star, but it still has all the punch up top. The trans tuning seems to keep the RPM's close to a better RPM for torque and it really shows when you stab the throttle. I played around in sport a little bit and the boost is very responsive, it doesn't take much pedal and the truck starts to pull very hard.
One surprise would be fuel mileage. It can be tough to judge accurately with varying terrain where I live, but I was seeing around 13.5-14.5 MPG before, and I'm seeing 16+, a solid 2 MPG gain so far!!! I really find this to be a very POLISHED tune, I believe the JDM guys really put in the work to come up with a winner. I can't imagine anyone would be disappointed with the results! I plan to keep this tune on and not revert back to the 5 star."
Please send your completed tune sheet at your earliest convenience to: email@example.com so we can commence your order. If you need any help filling out your tune sheet please feel free to email: firstname.lastname@example.org or call 732-780-0770
Important parts and tuning notice:
By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways.
IT IS OUR POLICY TO NOT DISABLE ANY FEDERALLY MANDATED EMISSIONS EQUIPMENT NOR MONITORS ON ANY VEHICLE WITH A VEHICLE IDENTIFICATION NUMBER (VIN). IT IS A FEDERAL OFFENSE FOR US TO DO SO.
Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, JDM Engineering wants you to know the following:
Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase.
Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. JDM Engineering assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.
- 10.00 (in)
- 6.00 (in)
- 3.00 (in)