2010-2014 Raptor 6.2L F-150 2.9L Whipple GEN 4 Supercharger with JDM 700+HP Performance Upgrade Package AKA The "TRX KILLER"
Shopping for a Supercharger Kit that will achieve the Maximum Performance out of your Raptor 6.2L in a Turn Key Package?! Our team at JDM Engineering has put together a proven and tested package using Whipples massive 2.9L twin screw GEN 4 supercharger that will add 230+ HORSEPOWER and over 260 foot pounds of TORQUE over stock to your 2010-2014 Raptor/F-150 6.2L!
This package includes the complete Whipple Charger kit with the newly Upgraded Intercooler System. In order to supply enough fuel for 700+HP kit comes with a set of Ford Racing 47lb fuel injectors. A 3.250" Whipple Supercharger pulley and Shorter Gates Belt is added to increase boost levels to 10-11 psi on average. A set of NGK Iridium Spark Plugs are included as well to help cool the combustion chamber and prevent spark blow out. This is a suggestion with the base Whipple kit but a mandatory when adding more boost.
Most importantly, this kit comes packaged with the SCT Xcal 4 flash device. Each tune is built specific to the customers modifications, fuel octane availability and driving style.
The Whipple 2.9L Supercharger - WK 2320TB along with NGK spark plugs, 47Lb injectors, 3.250" Supercharger and the SCT X4 is the package you need for your 2010-2014 6.2L SVT Raptor to make it that mean driving machine!!
Adds over 200HP to your truck while retaining great driveability
JDM Engineering has done extensive street and dyno testing and countless hours of tuning development on this Whipple 2.9L 700HP package for the Ford Raptor and F-150 6.2L trucks.
The 2010-2014 JDM Engineering Raptor 6.2L Whipple Supercharger (stock vs modified comparison)
- Stock Raptor 6.2L = 411HP (320 WHP) 434 TQ (335 WTQ)
- Modified Using JDM Whipple 700HP Package (530+ WHP) (500+ WTQ)
- 2.9L Whipple GEN 4 "Tuner" Supercharger kit- WK-2320TB
- SCT X4 Tuner
- 3.250" Supercharger Pulley 10-11 PSI
- 47lb. Fuel Injectors
- NGK Iridium Spark Plugs (set gap to .030" before install)
- Gates Belt 061247
Add Ford Racing Twin 65mm Throttle Body for an Additional 50 Flywheel Horsepower! +649.00
Add Whipple oversize Heat Exchanger w/ spuds & grommets includes Dual Fan Kit . +882.00
- 2010 Raptor 6.2L SVT F-150
- 2011 Raptor 6.2L SVT F-150
- 2012 Raptor 6.2L SVT F-150
- 2013 Raptor 6.2L SVT F-150
- 2014 Raptor 6.2L SVT F-150
- 2011 6.2L F-150 / F-250
- 2012 6.2L F-150 / F-250
- 2013 6.2L F-150 / F-250
- 2014 6.2L F-150 / F-250
*All supercharger kits ship direct from the manufacturer. Normal ship time is 4-6 weeks and is subject to change. Call for current availability.
Please send your completed tune sheet at your earliest convenience to: firstname.lastname@example.org so we can commence your order. If you need any help filling out your tune sheet please feel free to email: email@example.com or call 732-780-0770
Important parts and tuning notice:
By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways.
IT IS OUR POLICY TO NOT DISABLE ANY FEDERALLY MANDATED EMISSIONS EQUIPMENT NOR MONITORS ON ANY VEHICLE WITH A VEHICLE IDENTIFICATION NUMBER (VIN). IT IS A FEDERAL OFFENSE FOR US TO DO SO.
Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, JDM Engineering wants you to know the following:
Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase.
Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. JDM Engineering assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.
- 36.00 (in)
- 45.00 (in)
- 32.00 (in)