Shop by Vehicle - MUSTANG - GT - 2018-2023 MUSTANG GT 5.0L - Engine Components

2018-2020 Ford F-150 5.0L Complete Engine Gasket kit JL3Z-6079-C

MSRP:

Was:

Now: $269.00
Coyote Piston Squirter cooling jet block off plates CR3Z-6K868-B

MSRP:

Was:

Now: $84.99
ARP 2000 Ford Coyote 5.0L GEN 3 2018+ M12 Kit #256-4302

MSRP:

Was:

Now: $512.19
Water pump gasket F1VY-8507-A

MSRP:

Was:

Now: $5.50
Ford Performance 5.0L/5.2L GT500 ALUMINUM OIL PAN AND PUMP KIT

MSRP:

Was:

Now: $1,149.00
KING COYOTE 5.0L 2011-2021 MAIN BEARING KIT

MSRP:

Was:

Now: $139.97
Ford Performance 2018-2021 5.0L/5.2L Main hardware kit

MSRP:

Was:

Now: $40.00
2018-2021 Mustang Coyote head changing kit M-6067-M5018

MSRP:

Was:

Now: $189.99
Manley H-Tuff Forged Steel Connecting Rods

MSRP:

Was:

Now: $993.20
GEN 3 COYOTE 2018+ MUSTANG/F150 CRANKSHAFT

MSRP:

Was:

Now: $449.99
GEN 3 2018+ MUSTANG/F150 COYOTE ENGINE BLOCK M-6010-M504VC

MSRP:

Was:

Now: $1,149.99
JDM GEN 3 COYOTE REBUILD KIT 2018+

MSRP:

Was:

Now: $2,549.00
Manley GEN III Coyote (2018-2022 5.0L) Pistons with Rings

MSRP:

Was:

Now: $1,049.00
FORD PERFORMANCE 2018 GEN 3 5.0L 4V TI-VCT MUSTANG COYOTE CAMSHAFT DRIVE KIT

MSRP:

Was:

Now: $639.99
FORD PERFORMANCE 5.0L/5.2L HIGH STRENGTH FORGED STEEL CRANKSHAFT SPROCKET

MSRP:

Was:

Now: $49.95
JDM COYOTE OIL PUMP ASSEMBLY

MSRP:

Was:

Now: $189.99
King Bearings 4.6L/5.4L/5.8L/Coyote 5.0L Coated Rod Bearing Set

MSRP:

Was:

Now: $189.99

2018-2020 Ford F-150 5.0L Complete Engine Gasket kit JL3Z-6079-C

Complete engine overhaul gasket kit for 2018-2020 Ford F-150 5.0L engine. Ford OEM original parts

MSRP:

Was:

Now: $269.00
Coyote Piston Squirter cooling jet block off plates CR3Z-6K868-B

2011-2023 Mustang GT 5.0L Coyote and F-150 5.0L Piston cooling jet block off plates. Used in applications with aftermarket rods and pistons due to clearance issues or for high power applications that require more oil pressure. CR3Z-6K868-B

MSRP:

Was:

Now: $84.99
ARP 2000 Ford Coyote 5.0L GEN 3 2018+ M12 Kit #256-4302

ARP Head studs for 2018+ Gen 3 Coyote Engines. Running high boost with a Supercharger, Turbochargers, or even Nitrous. ARP head studs are a must to keep your engine from lifting a head gasket!

MSRP:

Was:

Now: $512.19
Water pump gasket F1VY-8507-A

Replacing your water pump on a Ford Modular or Coyote engine? Team JDM uses Ford Factory OEM gaskets to ensure the best quality seal to your engine block. Recommended to be replaced every time the water pump is removed...

MSRP:

Was:

Now: $5.50
Ford Performance 5.0L/5.2L GT500 ALUMINUM OIL PAN AND PUMP KIT

Fits all 5.2L and 5.0L Coyote engines Includes the production 2020 GT500 high output oil pump, pickup tube, oil pan, windage tray/gasket and necessary installation hardware This unique cast/machined oil pan features a FP350S racecar inspired trap...

MSRP:

Was:

Now: $1,149.00
KING COYOTE 5.0L 2011-2021 MAIN BEARING KIT

Fit's all 2011-2021 Coyote engines, these are standard size bearings When you need the best, you go to a specialist—and for the best bearings, you see King Engine Bearings. King focuses on one product—bearings—and nothing else. Their...

MSRP:

Was:

Now: $139.97
Ford Performance 2018-2021 5.0L/5.2L Main hardware kit

Ford Performance OEM Block main hardware kit for 2018+ Mustang GT 5.0L Coyote and 2015+ GT350 5.2L. 2015-2020 Mustang GT350 5.2L All 2018-2021 5.0L Coyote blocks Complete set of production main cap and side...

MSRP:

Was:

Now: $40.00
2018-2021 Mustang Coyote head changing kit M-6067-M5018

Rebuilding your 2018+ Gen 3 Coyote engine? These head gaskets and bolts are what you need! Fits 2018-2020 5.0L Coyote cylinder head Note that 2018+ Coyote Head gasket is unique and will not interchange with 2011-17 engines. Kit includes...

MSRP:

Was:

Now: $189.99
Manley H-Tuff Forged Steel Connecting Rods

For our first time, we at JDM Engineering are offering the burly Manley H-Tuff connecting rods. These rods boast added material everywhere, but are notability meatier throughout the connecting rods beam area as well as around the parting planes on...

MSRP:

Was:

Now: $993.20
GEN 3 COYOTE 2018+ MUSTANG/F150 CRANKSHAFT

This is a brand new OEM Ford Coyote crankshaft as offered in any 2018+ Gen 3 engine. This is a Forged unit capable of supporting over 1000 horsepower at the flywheel reliably. Pair this with our rebuild kit and block, and you can build...

MSRP:

Was:

Now: $449.99
GEN 3 2018+ MUSTANG/F150 COYOTE ENGINE BLOCK M-6010-M504VC

This is a brand new OEM Coyote Gen 3 block straight from Ford. Ford Performance Part # M-6010-M504VC. Good if you have destroyed your current block or are looking to start a fresh new build. This block comes finish machined with the...

MSRP:

Was:

Now: $1,149.99
JDM GEN 3 COYOTE REBUILD KIT 2018+

This Gen 3 Coyote (2018+) rebuild kit is perfect for those looking to upgrade their stock coyote internals in their 2018+ Mustang GT or 5.0 F-150 beyond the already stout factory hardware from Ford. This rebuild kit is meant to outlast the stock...

MSRP:

Was:

Now: $2,549.00
Manley GEN III Coyote (2018-2022 5.0L) Pistons with Rings

New from Manley is a set of pistons specifically developed for the 2018+ coyote engine. With the introduction of direct injection and larger bores on the 2018+ Coyote, Manley has created pistons that far exceed the level of material strength,...

MSRP:

Was:

Now: $1,049.00
FORD PERFORMANCE 2018 GEN 3 5.0L 4V TI-VCT MUSTANG COYOTE CAMSHAFT DRIVE KIT

Camshaft drive kit for the 2018+, "Gen 3" 5.0L Coyote engine Fits 2018+ 5.0L 4V Ti-VCT Mustang Coyote engine Kit includes new production: Tensioner arms Chain guides Primary...

MSRP:

Was:

Now: $639.99
FORD PERFORMANCE 5.0L/5.2L HIGH STRENGTH FORGED STEEL CRANKSHAFT SPROCKET

This crankshaft sprocket is designed for race applications, but is produced by the same OEM supplier Ford uses for production vehicles, thus are OEM level. This forged steel crankshaft sprocket is approximately 5x stronger than the factory powdered metal...

MSRP:

Was:

Now: $49.95
JDM COYOTE OIL PUMP ASSEMBLY

In the event of an oil pump gear failure, your engine repair bill can be in the thousands, and leave you and your coyote stranded. No need risk failure of your vehicle, turmoil for your wallet, and unplanned unnecessary down time, when you eliminate any...

MSRP:

Was:

Now: $189.99
King Bearings 4.6L/5.4L/5.8L/Coyote 5.0L Coated Rod Bearing Set

Team JDM relies on King Bearings for high power application modular engine builds. King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance...

MSRP:

Was:

Now: $189.99