2004-2008 F-150 ROUSH/FOOSE SUPERCHARGED 5.4 500HP UPGRADE KIT

$959.00
(You save )
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout

Description

2004-2008 F-150 ROUSH/FOOSE SUPERCHARGED 5.4 500HP UPGRADE KIT

Upgrade your 2004-2008 F150 Roush Supercharged or Foose Edition F-150 with this JDM Engineering 500HP upgrade kit! With 450HP out of the box the Roush and Foose trucks are no slouch. We at JDM like to take things one step further making an already great product even better. Our upgrade kit includes a 2.80" supercharger pulley that adds 4-5psi over stock bringing the total boost level to about 10psi compared to the stock 5-6psi. We include a shorter belt to go along with the smaller supercharger pulley eliminating the chance of belt slip as well as a colder set of spark plugs to help keep things running smooth. 

To tie everything together we also include an SCT X4 flash tuner pre-loaded with our JDM Custom tune specific for your truck, our 500HP upgrade and the intended use of the truck. 

This 500hp Upgrade kit not only increases power but will also drastically improve automatic transmission shifting characteristics and increase throttle response removing any “lag” when attempting to accelerate. 

2004-2008 F-150 JDM 500HP Upgrade Kit Includes:

  • SCT X4 Tuner with JDM Custom Tune
  • Gates K080594 Belt
  • 2.80 Metco Pulley
  • Spark Plugs ( HT0 used with black boots 12MM 3V with brown boots) 

 

 

Removal of the stock supercharger pulley and installation of the 2.80" pulley requires the use of a pulley removal and install tool. See here for purchase of this tool: VMP/ ROUSH PULLEY PULLER TOOL

*This kit is not compatible with non-intercooled Roush Supercharger kits! 

**JDM Vacuum line rerouting Instructions will be emailed to you by one of our representatives after purchase. This must be done when adding more boost. 

 

CLICK HERE TO DOWNLOAD YOUR TUNE SHEET. 

 

 

 

Please send your completed tune sheet at your earliest convenience to: sales@teamjdm.com  so we can commence your order. If you need any help filling out your tune sheet please feel free to email: sales@teamjdm.com or call 732-780-0770

 

Please allow 10-15 business days for your order to be shipped and is subject to change due to demand. 

vs1.pngvs2.png

 

Important parts and tuning notice:

By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways. 

IT IS OUR POLICY TO NOT DISABLE ANY FEDERALLY MANDATED EMISSIONS EQUIPMENT NOR MONITORS ON ANY VEHICLE WITH A VEHICLE IDENTIFICATION NUMBER (VIN). IT IS A FEDERAL OFFENSE FOR US TO DO SO. 

Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, JDM Engineering wants you to know the following: 

Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at 
http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase. 

 

Emissions Notice:

 

Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. JDM Engineering assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

 

California Residents

 

The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.

Additional Details

SKU:
JDM-04-08-500-UPG
Width:
11.00 (in)
Height:
8.00 (in)
Depth:
8.00 (in)

Related Products

Customers Also Viewed

Subscribe to our newsletter

Get the latest updates on new products and upcoming sales

No thanks