JDM/FORD PERFORMANCE 5.3L 3V MODULAR STROKER SHORTBLOCK KIT
Includes: M-6009-B53, M-6067-3V50, M-6004-463V, M-9448-A463V, M-6031-BOSS50
Build BIG Modular Power with one simple package at one low price!
The JDM/Ford Performance 5.3L Modular Stroker shortblock kit is a great way to build modular power - from mild to wild - naturally aspirated or supercharged 3 valve engine.
Ford Performance Engineers have taken care of the toughest part of building a new engine by designing a strong and durable shortblock that offers a wide range of power possibilities. Ford Performance uses only the best parts, starting with the BOSS Modular block, and adding forged Eagle steel crankshaft, forged Eagle H-beam connecting rods with floating piston pins, and forged Mahle pistons. Bored and stroked to 5.3 liters, this short block is precision internal balanced and ready to be finished to your specific application.
- Engine type: 4.6L based Modular short block
- Approximately 10.5:1 Compression Ratio with 51cc heads and 6cc head gasket
- Displacement (Liters/cu in): 5.3L/323 cubic inches
- Bore x stroke (in): 3.701" bore x 3.750" stroke
- Block: Ford Racing M-6010-BOSS50 Cast Iron performance block
- Crankshaft: Eagle® 3.750-inch stroke forged steel crankshaft with 8 bolt flywheel pattern
- Connecting Rods: Eagle® 5.850-inch forged steel "H" beam rods with ARP® 2000 bolts
- Pistons: Mahle® forged aluminum pistons with a dish that is compatible with 2, 3 or 4 valve heads
- New high pressure oil pump
- Neutral balance rotating assembly
- Designed for 2, 3 or 4 valve cylinder head combinations (piston to valve check required depending on camshaft)
- Assembled and ready for your heads, cam, and timing set
This kit also includes the following Ford Performance parts needed to complete your 3V engine build:
5.0L 3V HEAD CHANGING KIT M-6067-3V50
- Fits M-6010-BOSS50 5.0L modular engine block with 94mm bore and 3V cylinder heads
- Kit includes multi-layer steel head gaskets and high-strength torque to yield head bolts
4.6L 3V CAMSHAFT DRIVE KIT M-6004-463V
- Camshaft drive kit for the 4.6L 3V aluminum and iron block.
- Fits 2005-2010 engines
Kit includes new production:
- Tensioner arms
- Chain guides
- Cover gaskets and front seal
- Primary timing chains
- Primary chain tensioners
- Camshaft sprockets, spacers, bolts and washers
- Crankshaft sprocket
- Crank position trigger wheel
- Includes fasteners
REPLACEMENT 3V HEADER GASKETS M-9448-A463V
Replacement header gaskets for 4.6L 3V engine. Sold in pairs.
ENGINE MOUNT BRACKETS M-6031-BOSS50
Designed to install the M-6010-BOSS50 block in a 2005-2010 Mustang
- Aluminum engine mounting brackets
- Adapter plates
Optional Billet Oil Pump Gear Upgrade (Highly Recommended for Supercharged/Turbo Applications) Select option at checkout.
- 24.00 (in)
- 31.00 (in)
- 26.00 (in)