2010-2014 Raptor 6.2L F-150 Whipple Supercharger JDM 650HP Upgrade Package (Supercharger not included)
Already have a Whipple Supercharger on your 2010-2014 Raptor 6.2L and looking for more power?! Our team at JDM Engineering has put together a proven and tested package of upgrades for Whipple's massive 2.9L twin screw supercharger that will add nearly 100 HORSEPOWER and over 85+ foot pounds of TORQUE over Whipple's factory tuning to your 2010-2014 Raptor/F-150 6.2L Supercharger! Add a Ford Racing 65MM Throttle Body for even more Power and Throttle Responce!
In order to supply enough fuel for 650HP Ford Racing 47lb fuel injectors are required for use. A 3.250 Whipple Supercharger pulley and Shorter Gates 1047 Belt is added to increase boost levels to 10-11 psi on average. A set of NGK Iridium Spark Plugs are included as well to help cool the combustion chamber and prevent spark blow out. This is a suggestion with the base Whipple kit but a mandatory when adding more boost.
Most importantly, this kit comes packaged with Custom Tuning from Jim D'Amore of JDM Engineering using the SCT X4 flash device. Each tune is built specific to the customers modifications, fuel octane availability and driving style.
The NGK spark plugs, 3.250 Supercharger Pulley & belt, and the SCT X4 with a pre-loaded JDM Custom Tune by James D'Amore is the package you need for your Whipple-charged 2010-2014 6.2L SVT Raptor to make it that mean driving machine!!
- Adds nearly 100 HP to your truck along with better drivability, shifting, throttle response, and fuel economy!
- JDM Engineering/James D'Amore's Custom Tuning
- JDM Engineering has done extensive street and dyno testing and countless hours of tuning development on this Whipple 2.9L 650HP package for the Ford Raptor and F-150 6.2L trucks.
The 2010-2014 JDM Engineering Raptor 6.2L Whipple Supercharger (stock vs modified comparison)
- Stock Whipple Raptor 6.2L = 430 RWHP and 466 TQ
- Modified Using JDM Whipple 650HP Package = 508 RWHP and 514 TQ
- 78 RWHP peak gain (Nearly 100 HP at 5400 RPM!!) and 48 TQ peak gain (Nearly 90 TQ at 5400 RPM!!!)
- SCT X4 Tuner with JDM Custom Tune
- 3.250 Supercharger Pulley 10-11 PSI - SCT-6M3250-RAP
- Upgraded NGK Spark Plugs
- Gates 061247 Belt
Kit can also be purchased with E-mail Tune only, Choose option before check out.
Add Ford Racing Twin 65mm Throttle Body for an Additional 50 Flywheel Horsepower!
- 2010 Ford Raptor/F-150 6.2L
- 2011 Ford Raptor/F-150 6.2L
- 2012 Ford Raptor/F-150 6.2L
- 2013 Ford Raptor/F-150 6.2L
- 2014 Ford Raptor/F-150 6.2L
Run like the Pros with Team JDM !!!!
Please send your completed tune sheet at your earliest convenience to: firstname.lastname@example.org so we can commence your order. If you need any help filling out your tune sheet please feel free to email: email@example.com or call 732-780-0770
Please allow 10-15 business days for your tuner to be shipped and is subject to change due to high demand and race season.
Important parts and tuning notice:
By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways.
IT IS OUR POLICY TO NOT DISABLE ANY FEDERALLY MANDATED EMISSIONS EQUIPMENT NOR MONITORS ON ANY VEHICLE WITH A VEHICLE IDENTIFICATION NUMBER (VIN). IT IS A FEDERAL OFFENSE FOR US TO DO SO.
Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, JDM Engineering wants you to know the following:
Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase.
Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. JDM Engineering assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.
- 10.00 (in)
- 7.00 (in)
- 7.00 (in)