phone: (732) 780-0770

Air Intake

9 of 9 Items
  • The S650 Mustang GT and Dark Horse cars are already fantastic to begin with, but why not make them a bit better than stock? The stock intake system is designed well, but still we felt that we could take the good from the stock system and make it even better. After a long engineering process, we are proud to release the IceBox™ Dual Air Intake for the S650 Mustang GT and Dark Horse. S650 Intake Features Custom designed airbox using factory ram air Perfect OEM fitment with no CEL No power loss in lower RPMs DFlow™ filters with SynoilD™ coming soon Roto Molded design for smooth size transitions For this new intake style we opted for a roto molded design produced from XPLE plastic. This type of plastic is very strong and temperature resistant to help keep intake temps down. The airbox is molded to fit directly into the OEM Ram Air ducts in the grille pulling in that fresh cold air to build power. Both clear plexiglass windows are included along with all necessary hardware (ships with orange peel-off protective coating).

    IceBox™ Dual Air Intake for Ford Mustang 5.0L ('24+)

    The S650 Mustang GT and Dark Horse cars are already fantastic to begin with, but why not make them a bit better than stock? The stock intake system is designed well, but still we felt that we could take the good from the stock system and make it even...

    $649.95
  • Designed to run the 2024 Mustang GT Coyote (Gen 4) dual throttle body engine M-6007-M50D with any manual transmission. Includes: PCM with Ford Performance calibration Electronic throttle control accelerator pedal, eliminating throttle cable routing challenges Unique control pack harness that replaces the stock body harness designed for custom vehicle builds OBD-II diagnostic port to assist in engine issue diagnosis Power distribution module Mustang GT air boxes Mustang GT Air inlet tubes MAF sensors Upper and lower radiator hoses HEGO sensors *PCM with Ford Performance calibration requires a return type fuel system. See installation instructions for fuel system requirements. Note: Installation of control pack PCM in a production vehicle will result in a no-start condition Note: NOT FOR USE WITH ANY F150 ENGINE For Gen 1 Coyote engine control pack see M-6017-A504VB For Gen 2 Coyote engine control packs see M-6017-504V and M-6017-M50A For Gen 3 Coyote engine control packs see M-6017-M50B, M-6017-M50BA, and M-6017-M50BAA For Gen 4X Coyote engine control packs see M-6017-M50HA and M-6017-M50HM

    2024 COYOTE 5.0L CONTROL PACK MANUAL TRANS

    Designed to run the 2024 Mustang GT Coyote (Gen 4) dual throttle body engine M-6007-M50D with any manual transmission.Includes:  PCM with Ford Performance calibration Electronic throttle control accelerator pedal, eliminating...

    $2,734.65
  • Designed to run the 2024 Mustang GT Coyote 5.0L dual throttle body engine M-6007-M50DAUTO with the 10R80 10-speed transmission from the 2021-2024 Mustang GT. Includes: PCM with Ford Performance calibration Electronic throttle control accelerator pedal, eliminating throttle cable routing challenges Unique control pack harness that replaces the stock body harness designed for custom vehicle builds OBD-II diagnostic port to assist in engine issue diagnosis Power distribution module Mustang GT air boxes Mustang GT air inlet tubes MAF sensors Upper and lower radiator hoses HEGO sensors *PCM with Ford Performance calibration requires a return type fuel system. See installation instructions for fuel system requirements. Note: Installation of control pack PCM in a production vehicle will result in a no-start condition Note: NOT FOR USE WITH ANY F150 ENGINE For Gen 1 Coyote engine control pack see M-6017-A504VB For Gen 2 Coyote engine control packs see M-6017-504V and M-6017-M50A For Gen 3 Coyote engine control packs see M-6017-M50B, M-6017-M50BA, and M-6017-M50BAA For Gen 4X Coyote engine control packs see M-6017-M50HM and M-6017-M50HA

    2024 GEN 4 COYOTE CONTROL PACK - AUTOMATIC TRANS

    Designed to run the 2024 Mustang GT Coyote 5.0L dual throttle body engine M-6007-M50DAUTO with the 10R80 10-speed transmission from the 2021-2024 Mustang GT. Includes: PCM with Ford Performance calibration Electronic throttle control...

    $2,734.65
  • Unlock the full potential of your 2024-2025 Mustang 5.0L V8 with the Roush Performance Air Intake System. Designed to deliver maximum airflow and optimal performance, this system is a must-have upgrade for Mustang enthusiasts looking to enhance their driving experience. Key Features: Increased performance and airflow Visible air filters through clear closed-box lids Improves throttle response and engine sound Custom-designed airbox for a perfect fit High-flow, washable, and reusable air filter No tune required for installation Roush Performance branding Fits 2024-2025 Mustang 5.0L V8 models Not yet CARB EO approved

    2024-2025 Roush Mustang 5.0L V8 Air Intake System

    Unlock the full potential of your 2024-2025 Mustang 5.0L V8 with the Roush Performance Air Intake System. Designed to deliver maximum airflow and optimal performance, this system is a must-have upgrade for Mustang enthusiasts looking to enhance their...

    $549.99
  • Help protect your Ford Performance Supercharged Mustang GT and Dark Horse™ 5.0L engine with the Ford Performance Parts dual air/oil separator kit. This is a must have for any track enthusiast! Fits 2024-2025 Mustang GT and Dark Horse™ 5.0L engine with the Ford Performance Parts supercharger kit M-6066-M8800 Dual system, complete with left and right canisters, brackets, and hoses Precision molded canisters with unique filter media separates oil vapor from the air in the PCV system helping keep oil out of the intake Designed and engineered specifically for the 2024-2025 Mustang 5.0L with the Ford Performance Parts supercharger installed All OEM quality hoses and fittings are used for high quality installation and function This is a highly engineered system, not a universal "fits-all" kit, developed by the experts that know your supercharged engine best Canister is easy to drain by removing the PCV lines off the canister, removing the canister and draining the oil Engineered and manufactured in the USA ***For non-supercharged 2024-2025 Mustang GT and Dark Horse™, see M-6766-A50D ***For 2024-2025 Mustang EcoBoost, see M-6766-A23D

    MUSTANG 5.0L AIR OIL SEPARATOR FOR SUPERCHARGER

    Help protect your Ford Performance Supercharged Mustang GT and Dark Horse™ 5.0L engine with the Ford Performance Parts dual air/oil separator kit. This is a must have for any track enthusiast!   Fits 2024-2025 Mustang GT and Dark...

    $585.00
  • Help protect your 2024 Mustang 2.3L EcoBoost engine with the Ford Performance dual air/oil separator kit. This is a must for any track enthusiast. Fits 2024 Mustang with 2.3L EcoBoost engine Dual system comes complete with (2) canisters, brackets, and hoses Precision molded canisters with unique filter media separates oil vapor from the air in the PCV system to keep oil out of the intake Designed and engineered specifically for the 2024 Mustang with 2.3L EcoBoost engine All OEM style hoses and connectors are used for high quality installation and function Highly engineered system - not a universal fits-all kit - designed by engineers that know your Mustang EcoBoost engine Easy to drain canisters - remove PCV hoses, remove canisters and drain oil Engineered and manufactured in the USA ***For 2024 Mustangs equipped with 5.0L engine, see M-6766-A50D

    2024+ MUSTANG 2.3L ECOBOOST AIR/OIL SEPARATOR KIT

    Help protect your 2024 Mustang 2.3L EcoBoost engine with the Ford Performance dual air/oil separator kit. This is a must for any track enthusiast.  Fits 2024 Mustang with 2.3L EcoBoost engine Dual system comes complete with (2) canisters,...

    $562.50
9 of 9 Items
!

© 2026 JDM Engineering All rights reserved. | Sitemap