2011-2014 Roush Supercharger Upgrade Kit JDM Stage 4

$1,299.00
(You save )
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout

Description

2011-2014 Roush Supercharger Upgrade Kit JDM Stage 4 
If you have a 2011-2014 Roushcharged mustang and are looking for more power then look at what we have to offer you!  Team JDM has put together a package that will add 100 horsepower and over 120 foot pounds of torque to your Mustang.  This kit has been tested and developed in house on Team JDM's Roush Stage 3 Mustang. Hundreds of dyno pulls and quarter mile runs along with thousands of hours in custom tuning development have brought us to this incredible power increase for your car. 
 
Team JDM will build a custom tune file for your Roushcharged mustang and load it on to a SCT X4 programmer for your vehicle.  Then a 82mm Supercharger pulley and shorter belt are included to raise boost levels up 3 psi over stock! This is where a good bit of power and torque are gained!  Colder spark plugs are included to help fight off detonation and spark blow out from the extra boost pressure and heat generated by the smaller pulley.  Finally a K&N drop in panel filter is included for an increase in air flow.  This complete package will yield nearly 530 RWHP with out any other modifications! 
 
With the addition of a  bigger throttle body and exhaust horsepower levels as high as 570 RWHP have been seen in testing!  For more information about other parts to add more power. Check them out in the 2011-2012 Mustang sections or give our sales team a call.
 
The main components of this kit includes:
  • SCT X4 programmer with JDM Custom Tune
  • 82mm Supercharger pulley
  • Gates K060810 belt
  • Ford Racing 5.0L 4V 0 deg spark plugs
  • K&N drop in panel filter (332431 )

 

 

CLICK HERE TO DOWNLOAD YOUR TUNE SHEET. 

 

 

 

Please send your completed tune sheet at your earliest convenience to: sales@teamjdm.com  so we can commence your order. If you need any help filling out your tune sheet please feel free to email: sales@teamjdm.com or call 732-780-0770

 

Please allow 10-15 business days for your tuner to be shipped and is subject to change due to high demand and race season.

 

 

 

Important parts and tuning notice:

By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways. 

IT IS OUR POLICY TO NOT DISABLE ANY FEDERALLY MANDATED EMISSIONS EQUIPMENT NOR MONITORS ON ANY VEHICLE WITH A VEHICLE IDENTIFICATION NUMBER (VIN). IT IS A FEDERAL OFFENSE FOR US TO DO SO. 

Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, JDM Engineering wants you to know the following: 

Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at 
http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase. 

 

 

 

Emissions Notice:

 

 

 

Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. JDM Engineering assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

 

 

 

California Residents

 

 

 

The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.

 

Additional Details

SKU:
11-14 Rstage4
Width:
18.00 (in)
Height:
13.00 (in)
Depth:
9.00 (in)

Related Products

Subscribe to our newsletter

Get the latest updates on new products and upcoming sales

No thanks