2007-2012 Shelby GT500 750HP TVS Supercharger Upgrade
JDM Engineering's 2007-2012 Shelby GT500 750HP TVS Supercharger Upgrade Kit is a complete turn-key package ready to make 750HP with your 5.4L GT500 Engine. The kit comes with a Ford Racing 2013-2014 Shelby 2.3 TVS supercharger (M-6066-MSVT2365) with a 2.67" pulley, 2013-14 Shelby inlet, and Ford Racing Cobra Jet Throttle Body M-9926-SCJ65. This blower comes geared for 15-PSI boost which is a very safe level when running 91-93 pump gas. JDM includes a Custom Tune by James D'Amore loaded on an SCT Xcal 4 Flash Device. For improved air flow and increased mass airflow range, a JLT 123mm Cold Air Intake is included. Ford Racing 52lb (2013-2014 Shelby Style) injectors are included to keep up with the fuel demand at these power levels. Also included are 2 degree colder spark plugs (TR6 NGK) which will help to cool the combustion chamber and prevent detonation.
With the above parts, your 2007-2012 Shelby GT500 will make approximately make 650 HP at the tires which translates to 750+ at the engine and 625lb-ft of torque.
NOTE: 2007-2009 cars will require the Billet Pro Shop Evap Fitting for proper installation +$49. See selectable product options below.
- 650HP at the tires / 750+ @ the engine
- 625lb-ft torque
- Increase in Horse Power and Torque
- Better Drivability
- Ford Racing TVS 2.3L Supercharger M-6066-MSVT2365
- Ford GT500 2013-14 OEM Inlet Elbow
- Ford Racing Twin 65mm Cobra Jet Throttle Body M-9926-CJ65
- 2.67 Supercharger Pulley- 15 PSI Boost
- Supercharger belt
- JLT 123mm Cold Air Intake
- 52LB. Injectors (2013-2014 Shelby Style)
- NGK TR6 Spark Plugs
- SCT X4 with JDM Engineering Custom Tune
- 2007 Shelby GT500 Mustang
- 2008 Shelby GT500 Mustang
- 2009 Shelby GT500 Mustang
- 2010 Shelby GT500 Mustang
- 2011 Shelby GT500 Mustang
- 2012 Shelby GT500 Mustang
- 2007-2009 cars will require the Billet Pro Shop Evap Fitting for proper installation. +$49
- Optional Injector Dynamics 1000cc Fuel Injectors +$525 (For highly modified cars running More Boost and or Cam Shaft Upgrade)
Please send your completed tune sheet at your earliest convenience to: firstname.lastname@example.org so we can commence your order. If you need any help filling out your tune sheet please feel free to email: email@example.com or call 732-780-0770
Please allow 10-15 business days for your tuner to be shipped and is subject to change due to high demand and race season.
Important parts and tuning notice:
By ordering this tune, you agree to assume all responsibility for assuring that it is to be used for off-road and/or competition use only and is not to be used on a vehicle that is registered for use on public roads nor highways.
IT IS OUR POLICY TO NOT DISABLE ANY FEDERALLY MANDATED EMISSIONS EQUIPMENT NOR MONITORS ON ANY VEHICLE WITH A VEHICLE IDENTIFICATION NUMBER (VIN). IT IS A FEDERAL OFFENSE FOR US TO DO SO.
Because U.S., Canadian, and other international, state or provincial laws and regulations may prohibit removal or modification of components that were installed on vehicles by Ford Motor Company to meet emission requirements or to comply with motor vehicle safety regulations applicable to vehicles manufactured for use on public roads, JDM Engineering wants you to know the following:
Most of the parts and services offered in this online catalog are for off-road use or competition use only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this off-road or race use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assume all associated risk of the purchase.
Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. JDM Engineering assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of our products or services. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
The emissions laws and regulations of the state of California apply to all non-racing vehicles. Consequently, some parts in this catalog may legally be used in California only on a racing vehicle which will never be operated on public roads.